The core disciplines of an industrial control system: the logic solver, the operator interface, the field devices that measure the process, and the panel that ties them together.
Browse Controls205 topics
Municipal water and wastewater is where most of this control work lands. Process context first, then the control strategy that serves it.
Browse Water & Wastewater56 topics
Organized by symptom, not by product. Start with what you can observe, work through what to check first, and narrow it down without guessing.
Browse Troubleshooting97 topics
Reference material for the documents a control system is designed, built, and handed over with.
Browse Engineering Library34 topics
Operational technology security for control systems, written for the people who actually maintain them.
Browse Cybersecurity70 topics
Step-by-step procedures for the tasks that come up on real jobs. Each one is written to be worked through with the equipment in front of you.
Browse How-To36 topics
Longer-form technical writing, published as it is finished and revised as field experience corrects it.
Browse Articles12 topics
Software Eric Sullivan is building on his own time. These are personal projects, not products of any employer.
Browse Tools & Projects7 topics
Instrumentation
Comparing an instrument against a known reference and, where necessary, adjusting it so it reads correctly across its range.
Checking at zero alone hides span errors. A minimum of three points, including the midpoint, catches both offset and span problems in about a minute.
Have a controls question? Contact Eric Sullivan directly.
863-698-8266