CalAmp Viper SC

Viper SCâ„¢ IP Router for Licensed Spectrum

 

 

This robust communications link for VHF, UHF & 900 licensed networks features an internal web browser with a familiar interface for IT and network administrators to set up and view device information, configure network parameters and deploy unit upgrades from any location. Using a Software Defined Radio, Viper SC is programmable for 50, 25, 12.5, or 6.25 kHz channels.

Each Viper SC features single device store and forward and route redundancy for extended range and easy network expansion. With advanced diagnostic capabilities, over the air firmware upgrades, channel migration and RoHS compliance, you can bet your investment today is protected well into the future.

MultiSpeed operation allows each remote Viper SC to communicate to a Viper SC Base Station at the fastest speed supported by a given signal strength. MultiSpeed operation results in an adaptive network which is optimized for performance and reliability.

 

Call For Pricing 1-800-277-0109

 

CalAmp Viper SC

140-5018-502

VIPER-SC-100, VHF 136-174 MHZ,

140-5118-502

VIPER-SC-100 STANDARD BASE STATION, VHF 136-174 MHZ

140-5318-502

VIPER-SC-100 REDUNDANT BASE STATION, VHF 136-174 MHZ

140-5018-503

VIPER-SC-100, DUAL RF PORT VHF 136-174 MHZ

140-5318-503

VIPER-SC-100 DUAL RF PORT REDUNDANT BASE STATION, VHF 136-174 MHZ

140-5028-502

VIPER-SC-200, VHF 215-240 MHZ

140-5128-502

VIPER-SC-200 STANDARD BASE STATION, VHF 215-240 MHZ

140-5328-502

VIPER-SC-200 REDUNDANT BASE STATION, VHF 215-240 MHZ

140-5028-503

VIPER-SC-200, DUAL RF PORT VHF 215-240 MHZ

140-5328-503

VIPER-SC-200 DUAL RF PORT REDUNDANT BASE STATION, VHF 215-240 MHZ

140-5048-502

VIPER-SC-400, UHF 450-512 MHZ

140-5148-502

VIPER-SC-400 STANDARD BASE STATION, UHF 450-512 MHZ

140-5348-502

VIPER-SC-400 REDUNDANT BASE STATION, UHF 450-512 MHZ

140-5048-503

VIPER-SC-400, DUAL RF PORT UHF 450-512 MHZ

140-5348-503

VIPER-SC-400 DUAL RF PORT REDUNDANT BASE STATION, UHF 450-512 MHZ

140-5098-502

VIPER-SC-900, MAS 928-960 MHZ

140-5198-502

VIPER-SC-900 STANDARD BASE STATION, MAS 928-960 MHZ

140-5398-502

VIPER-SC-900 REDUNDANT BASE STATION, MAS 928-960 MHZ

140-5098-503

VIPER-SC-900, DUAL RF PORT MAS 928-960 MHZ

140-5398-503

VIPER-SC-900 DUAL RF PORT REDUNDANT BASE STATION, MAS 928-960 MHZ